E-MAX Sequential Event Recorder Specifications
| Input Points | 16
isolated or 32 non-isolated per card • 4 cards per input chassis 1024 points maximum per recorder. |
| Cable Specifications | |
|
Type Impedance Capacitance Velocity of propagation Shielding Connectors Signal attenuation |
RG-59 75 W 84% Foil and Copper
braid Waterproof F-type <10 dB/100 feet for cable and connectors |
|
Time Accuracy Power Input Surge Withstand Capability |
1 Minute/year 90 to 160 Vdc 120 Vrms ANSI/IEEE C37.90-1989 |
| Autotest Capability | Time-based
Self-Test Manual Point by Point Inspection capability All Points Test |
| Reporting Capability | Periodic
or on Demand / Local or Remote Selection Event Summary • Period Activity Summary • Historical Summary Period Capability (1 minute to 1 year) |
| Alarms 1. System Operation 2. System Failure 3. DC Power 4. Loss of Time Sync. 5. Memory 75% Full |
Panel
LED indication with relay contact output for conditions below. Record capture - Resets after data has been stored on the hard disk. Deadman timer, system power supply failure or System OFF LINE. Loss of system DC input power. No primary time synchronization. Data Record storage area more than 75% full. |
|
Communications Capability
|
Auto Reporting •
Responding to Polling • Multiple Station Reporting |
| Add-on Capability | Modem Available — 56 kbps V. 90 |
|
Operating Temperature Storage Temperature Humidity Shock and Vibration |
-20° to +60° C -40° to +70° C 0 to 95% R.H. maximum non-condensing Consult factory for seismic qualification data |
|
Configuration Burn-in Test |
19 inch rack mountable. 100 hour minimum |
|
E-MAX
Instruments, Incorporated
13 Inverness Way South Englewood, Colorado 80112 Tel: 303.799.6640 © E-MAX Instruments, Incorporated 1996-2005 All Rights Reserved |
|