| Part Number | Type | Application | Capacity | ||||
| 035D062 035D063 035D064 035D066 035D067 035D068 |
MPX-1 MPX-1 MPX-1 MPX-1 MPX-1 MPX-1 |
Transmitter Transmitter Transmitter Receiver Receiver Receiver |
64
Point 96 Point 128 Point 64 Point 96 Point 128 Point |
||||
| For smaller capacity systems please see the MPX-2, MPX-2 Specifications | |||||||
| DATA TRANSMITTER | |||||||
|
Input Points Field Contact Input Input Noise Immunity Power Isolation Wire Terminations
|
16 to 128 points in a single chassis. 256 points system maximum Factory set for 5, 24, 48 or 125 Vdc SWC Test ANSI C37.90a-1974 DC/DC Converter from 48 or 125 Vdc 5 Watts Max. 2500
Vrms min. between pairs of points. 1500 Vrms all circuits to ground Disconnecting
Switch Terminals Phoenix KDS-3MT or equal or |
||||||
|
Mechanical Dimensions |
Transmitter/Receiver Case 19.0 x 8.75 x 15.0 inches |
||||||
| DATA RECEIVER | |||||||
| Receiver Output | 1.
Reed Relay 125 Vdc 100 mA 2. MosFET 400 V 2 A maximum |
||||||
| Loss of Valid Data Alarm | Settable
Delay of 1 to 5 seconds ( invalid data or loss of fiber) SPDT Contact output - 125 Vdc 100 mA resistive |
||||||
|
Circuit Isolation Power Supply |
1500 Vrms all output circuits Requires 5 Vdc at 1 A. supplied by internal isolated DC/DC Converter |
||||||
| TEMPERATURE RANGE | |||||||
|
Operating Storage Humidity |
-25° to +70° C -54° to +85° C 0 to 95% R.H. Non-condensing |
||||||
|
|
|||||||
|
E-MAX
Instruments, Incorporated
13 Inverness Way South Englewood, Colorado 80112 Tel: 303.799.6640 © E-MAX Instruments, Incorporated 1996-2003 All Rights Reserved |
|||||||
 |
 |