MPX-2 - Specifications and Order Information
| Part Number | Type | Application | Capacity |
| 035D111 035D112 |
MPX-2 MPX-2 |
Transmitter Receiver |
16
Point 16 Point |
| For larger capacity systems please see the MPX-1, MPX-1 Specifications | |||
| DATA TRANSMITTER | |
|
Input Points Field Contact Input Input Noise Immunity Power Isolation Wire Terminations |
16 Factory set for 5, 24, 48 or 125 Vdc SWC Test ANSI C37.90a-1974 DC/DC Converter from 48 or 125 Vdc 5 Watts Max. 2500
Vrms min. between pairs of points. 1500 Vrms all circuits to ground Disconnecting
Switch Terminals Phoenix KDS-3MT or equal or |
|
Mechanical Dimensions |
Transmitter/Receiver Case 7 x 6.75 x 3 inches |
| DATA RECEIVER | |
| Receiver Output | 1.
Reed Relay 125 Vdc 100 mA 2. MosFET 400 V 2 A maximum |
| Loss of Valid Data Alarm | Settable
Delay of 1 to 5 seconds ( invalid data or loss of fiber) SPDT Contact output - 125 Vdc 100 mA resistive |
|
Circuit Isolation Power Supply |
1500 Vrms all output circuits Requires 5 Vdc at 1 A. supplied by internal isolated DC/DC Converter |
| TEMPERATURE RANGE | |
|
Operating Storage Humidity |
-25° to +70° C -54° to +85° C 0 to 95% R.H. Non-condensing |
|
E-MAX
Instruments, Incorporated
13 Inverness Way South Englewood, Colorado 80112 Tel: 303.799.6640 © E-MAX Instruments, Incorporated 1996-2003 All Rights Reserved |
|
 |
 |